T_k_n 9 a P_nora_¢ S÷qu÷H¢÷ of P_ctu_÷s
'_ Pressthe Mode button on fop of
the camera until the Panoram_
E:;22:]mode appears in the Image
Display. Thecamera switches to
Lh_ View with =_ displayed in
the Image Display. You are now
ready to take the first picture in
your panoramic sequence.
NOTE Panorama images are stitched together from left to
right, so your first image must be at the bft-most end of
the panorama view.
2 Pressthe Shuffer button to take the
first picture in the panoramic
sequence.After Instan_Review,the
camera switches to Live View with
I_ displayed in the Image
Display.
3 Position the camera to take the
second picture. Notice the transparent overlay of the image
of the first picture in the sequence superimposed on the left
third of the LiveView screen. Use this overlay to align your
second picture horizontally with the first.
4 Pressthe Shuffer button to take the
second picture. After Instant
Re:vie_;the camera switchesto
Lh_ Vi_' with _ displayed in
the Image Display. Again, the
transparent overlay of the previous
image is superimposed on the left
third of the LiveView screen to
enable you to align your third picture.
Chapter 2: Taking Pictures and Recording Video Clips 49
To Next Page
Loading...
