"] In the Capture Menu (page 50), select EV Compensation.
2 In the EV Compensation sub-
menu, usethe _ _ Buttons to
change the EV setting in 0.33
steps from -3.0 to +3.0. The new
setting isapplied to the Live View
screen Behind the menu, so you
can see the effect each setting will
have on the picture.
3 PressMenu/OK to save the setting and return to the
Cc_ptureMenu.
If the setting isanything other than the default setting of 0
(zero), the number value will appear in the LiveView screen
next to the _ icon.
The new setting remains in effect until it is changed again or
until the camera is turned off. Holding down the Menu/OK
Button when you turn the camera back on will restore this
setting to what it was when you turned it off.
_ag÷ Quality
NOTE This setting does not apply when recording video clips.
This setting allows you to setthe resolution and JPEG
compression of the still images you capture with your camera.
The _mageQuality sub-menu has four pre-defined settings, as
well as a menu option through which you can create your own
custom Image Quality setting.
52 HP Photosmart R507/R607 User's Manual
To Next Page
Loading...
