Setting Up the HP [ngtant Share
Menu on the Camera
Before you can use H? In_tant Share, you must first set up the
HP Instant Share Menu on your camera. Thefollowing
procedure explains how to do this.
NOTE You will need an Internet connection to complete this
procedure on a Windows computer. Macintosh users,
however, wilJ not need an lnternet connection.
NOTE If you have an optional memory card installed in your
camera, make sure that the memory card in your camera
is not locked and has some free space on it.
"_ Make sure that the HP Image Zone software is installed on
your computer (see page 19).
2 Turn on the camera, and then press the H? InstantShare [2]
button on the back of the camera.
3 The HP _ns_an_Share Menu appears on the Image Display.
Use the v Button to scroll to the Bottom of the list in the H?
Instant Share Menu, highlight HP _ns_nf Share Setup. _%,
and press the Menu/OK Button.
Once you have selected HP Ins_an_Share Setups_ _, a
message appears on the Image Display asking you to
connect the camera to your computer.
NOTE If your computer is running Windows XP,when you
connect the camera to your computer in the next step, a
dialog box may display that requests you to Selectthe
pr_ram fo launch br this action. Simply click Cancel to
close this dialog box.
86 HP Photosmart R507/R607 User's Manual
To Next Page
Loading...
