Filename: s4adwlaK Title: Addendum [3-column 1 or 2 pages]
Template: HP-Print2K.dot Author: WASSER Studios Last Saved By: James Legatt
Revision #: 6 Page: 1 of 1 Printed: 02/02/04 10:44 AM
Your Wireless PCI Adapter consists of:
■
One external remote antenna with attached
1.5 meters (5 feet) cable
■
One (small sized) CD with Quick Installation Guide
and User’s Manual.
NOTE: The PCI adapter card and driver are pre-installed in
your PC.
1 Locate the antenna and the CD, labelled Wireless
PCI Adapter; they are together in the PC box or
accessory box.
A
B
2 Screw the antenna cable to the antenna
connector (A) located on the back of your PC
near the PCI adapter status indicators (B).
3 Place the antenna on the desktop PC or a table
to get better data transmission and reception.
4 Configure the Wireless PCI Adapter. Refer to the
documentation on the CD.
Refer to the Quick Installation Guide or the User’s
Manual on the CD for steps to connect, position the
antenna, or configure your Wireless PCI Adapter.
Important Information About
Your Wireless PCI Adapter
Printed in
Need help?
General
