Table 5-2 Memory module descriptions and part numbers (continued)
Description Spare part number
8 GB (PRC) N77398-001
Before removing the memory, follow these steps:
1. Prepare the computer for disassembly (see Preparation for disassembly on page 36).
2. Remove the bottom cover (see Bottom cover on page 36).
3. Disconnect the battery cable from the system board (see Battery on page 47).
1. Lift the cover off the memory modules.
2. Spread the two retention clips outward (1) until the memory module tilts up at a 45° angle, and then
remove the module (2). Use the same procedure to remove all memory modules.
To prevent damage to the memory module, hold the memory module by the edges only. Do not
touch the components on the memory module.
Memory modules
39
To Next Page
Loading...
