● Display cable (4)
● USB cable (ZIF) from USB board (5)
● USB cable (ZIF) from system board (6)
● Touchpad cable (ZIF) (7)
● Keyboard backlight cable (ZIF) (select products only) (8)
● Keyboard cable (ZIF) (9)
● Fingerprint reader cable (ZIF) (select products only) (10)
● RTC battery cable (11)
● WWAN cable (12)
2. Remove the port bracket (1), by removing the three Phillips M2.0 × 4.0 screws (2) that secure the
bracket to the system board, and then removing the bracket (3).
3. Remove the two Phillips M2.0 × 2.5 screws (4) that secure the system board to the computer.
48 Chapter 5 Removal and replacement procedures for authorized service provider parts
To Next Page
Loading...
