4. Lift the side of the system board upward (5), and then pull the system board away from the connectors
on the side of the computer to remove it (6).
Reverse this procedure to install the system board.
Speakers
To remove the speakers, use this procedure and illustration.
Table
5-14 Speaker description and part number
Description Spare part number
Speakers M21723-001
Before removing the speakers, follow these steps:
1. Prepare the computer for disassembly (Preparation for disassembly on page 30).
2. Remove the bottom cover (Bottom cover on page 30).
3. Remove the battery (see Battery on page 31).
4. Remove the system board (see System board on page 45).
Remove the speakers:
1. Remove the two Phillips M2.0 × 2.0 screws (1) that secure each speaker to the computer.
48 Chapter 5 Removal and replacement procedures for authorized service provider parts
To Next Page
Loading...
