EL-MF877-00 Page 3
Template Revision C
Last revalidation date 09-May-2018
HPI instructions for this template are available at EL-MF877-01
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items contained in the
product that require selective treatment (with descriptions and arrows identifying locations).
3.21 Use screwdriver to release base cover #1 screw 5PCS, and disassemble base cover from hinge side
3.22 Unplug battery cable and use screwdriver to release battery screw 6 PCS and release Battery.
3.23 Use screwdriver to release heat sink and fan #1 screw 7 PCS, release fan cable and remove it
To Next Page
Loading...
