8. Remove the display bezel (4).
The display bezel is available using spare part number 828406-001 in models without a webcam and
828407-001 in models with a webcam. Display bezel mylar screw covers are available in the Rubber Kit,
spare part number 828415-001.
9. If it is necessary to replace the webcam or microphone module, disconnect the cable from the module
(1), and then gently pull the module away from the double-sided tape on the display enclosure (2).
The webcam module is available using spare part number 826395-001. The microphone module is
available using spare part number 826385-001.
Component replacement procedures 77
To Next Page
Loading...
