Select To do this
Built-In Device Options
●
Enable/disable the wireless button state (enabled by
default).
●
Enable/disable the embedded WLAN device (enabled by
default).
●
Enable/disable embedded WWAN device radio (select
models only; enabled by default).
●
Enable/disable embedded Bluetooth® device radio
(enabled by default).
●
Enable/disable the Network Interface Controller (LAN)
(enabled by default).
●
Enable/disable LAN/WLAN switching (disabled by
default).
●
Set the wake on LAN state. Options include the
following:
◦
Disabled
◦
Boot to Network (set by default)
◦
Follow Boot Order
●
Enable/disable the fingerprint device (enabled by
default).
●
Enable/disable a modem device (enabled by default).
●
Enable the ambient light sensor (enabled by default).
●
Enable/disable the Notebook MultiBay device (enabled
by default).
●
Enable/disable the integrated camera (select models
only; enabled by default).
●
Enable/disable the power monitor circuit (enabled by
default).
●
Enable/disable the audio device (enabled by default).
●
Enable/disable optical disc drive (enabled by default)..
●
Enable/disable internal microphone (enabled by default).
●
Enable/disable the internal speakers (enabled by default).
Port Options (all are enabled by default) NOTE: All port options are enabled by default.
●
Enable/disable the Smart Card slot.
●
Enable/disable the flash media reader.
●
Enable/disable the USB port.
CAUTION: Disabling the USB port also disables
MultiBay devices on the advanced port replicator.
●
Enable/disable the 1394 port.
●
Enable/disable the eSATA port.
Computer Setup in Windows Vista and Windows XP 97
To Next Page
Loading...
