Top cover
Description Spare part number
Top cover
NOTE: The top cover kit includes the TouchPad assembly.
For use with models with fingerprint readers 610833-001
For use with models without fingerprint readers 610834-001
Before removing the top cover, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 40).
5. Remove the following components:
a. Switch cover (see
Switch cover on page 51)
b. Keyboard (see
Keyboard on page 53)
c. WLAN cables (see
WLAN module on page 42)
d. WWAN cables (see
WWAN module on page 45)
Remove the top cover:
1. Position the computer upside down with the front toward you.
56 Chapter 4 Removal and replacement procedures
To Next Page
Loading...
