6. Pull the display away from the computer (3).
Remove the display assembly components:
1. If it is necessary to replace the display bezel:
a. Use a non-marking tool to separate the display from the display cover (1).
b. Rotate the display over and place it next to the display cover (2).
Display bezels are available using the following spare part numbers:
– Non-touch displays with camera module: L09579-001
– Non-touch displays with microphone module: L09580-001
2. If it is necessary to replace the camera or microphone module:
a. Use a tool to detach the camera (1) from the display cover.
Component replacement procedures 77
To Next Page
Loading...
