Battery
Description Spare part number
3-cell, 41-WHr, 3.615-AHr, Li-ion battery (includes cable) 844203-850
Before removing the battery, follow these steps:
1. Turn o the computer. If you are unsure whether the computer is o or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the keyboard/top cover (see Keyboard/top cover on page 18).
Remove the battery:
1. Remove the six Phillips M2.0×3.0 screws (1) that secure the battery to the bottom cover.
2. Lift the rear edge of the battery (2) to disconnect it from the system board.
3. Remove the battery (3).
Reverse this procedure to install the battery.
Component replacement procedures 27
To Next Page
Loading...
