5-56
Quality of Service: Managing Bandwidth More Effectively
Globally-Configured QoS
Example. In this example, 802.1p priorities are assigned to packets received
in VLANs 1, 20, 30, and 40.
Figure 5-22. Displaying the VLANs Available for QoS Prioritization
Enter the following commands to mark VLAN packets that match the specified
VLAN IDs with an 802.1p priority:
Syntax: no vlan < vid > qos
Removes the specified VLAN-ID as a QoS classifier and resets
the priority for that VLAN to No-override.
Syntax: show qos vlan-priority
Displays a listing of the QoS VLAN-ID classifiers currently
in the running-config file, with their priority data.
HP Switch(config)# show vlans
Status and Counters - VLAN Information
Maximum VLANs to support : 256
Primary VLAN : DEFAULT_VLAN
Management VLAN :
VLAN ID Name | Status Voice Jumbo
------- -------------------------------- + ---------- ----- -----
1 DEFAULT_VLAN | Port-based No No
20 VLAN_20 | Static No No
30 VLAN_30 | Static No No
40 VLAN_40 | Static No No
Mark
VLAN 1
packets
with
priority 2.
Mark VLAN 20 and 30
packets with priority 5.
Mark VLAN 40 packets
with priority 7.
To Next Page
Loading...
Need help?
General