HP ProLiant BL460c Gen9 - Page 28

Removal and replacement procedures 28
2.
Press down firmly on the mezzanine assembly handles, and then close the mezzanine assembly latch.
3. Install the access panel ("Access panel" on page 24).
4. Install the server blade.
Mezzanine options
To remove the component:
1. Power down the server blade (on page 22).
2. Remove the server blade (on page 23).
3. Place the server blade on a flat, level work surface.
4. Remove the access panel ("Access panel" on page 24).
5. Remove the mezzanine assembly ("Mezzanine assembly" on page 27).
6. Remove the mezzanine card from the mezzanine assembly.