EasyManua.ls Logo

HP PROLIANT DL160 G5 - Installing and configuring the server; Setup overview; Planning for installation; Determining a network access method

HP PROLIANT DL160 G5
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Hard Drive
Hard DriveHard Drive
Hard Drive
NOTE:
NOTE:NOTE:
NOTE:
SATA Non-Hot
Plug Hard Drives ONLY
required when Non-Hot
Plug CTO Chassis Model
in selected in Step 1.
NOTE:
NOTE:NOTE:
NOTE:
The components of a storage subsystem (e.g. the drive, the HBA/controller,
firmware, and the server backplane) should operate at the same data transfer rate or
the system bandwidth will be negotiated down to an acceptable level for all
components.
NOTE:
NOTE:NOTE:
NOTE:
Hard drives have either a one year or three year warranty; refer to the specific
hard drive QuickSpecs for details.
NOTE:
NOTE:NOTE:
NOTE:
A minimum of one hard drive is required when purchasing Non-Hot Plug
CTO Chassis Model (P/N 445192-B21).
Serial-ATA (SATA) Non-Hot Plug Hard Drives
Serial-ATA (SATA) Non-Hot Plug Hard DrivesSerial-ATA (SATA) Non-Hot Plug Hard Drives
Serial-ATA (SATA) Non-Hot Plug Hard Drives
(Non-Hot Plug Models Only)
SATA Non-Hot Plug 3.5" Midline (MDL) Drive
SATA Non-Hot Plug 3.5" Midline (MDL) DriveSATA Non-Hot Plug 3.5" Midline (MDL) Drive
SATA Non-Hot Plug 3.5" Midline (MDL) Drive
HP 750GB 3G SATA 7.2K NHP 3.5" MDL HDD
462595-B21
HP 500GB 3G SATA 7.2K NHP 3.5" MDL HDD
458941-B21
HP 250GB 3G SATA 7.2K NHP 3.5" MDL HDD
458939-B21
SATA Non-Hot Plug 3.5" Entry (ETY) Drives
SATA Non-Hot Plug 3.5" Entry (ETY) DrivesSATA Non-Hot Plug 3.5" Entry (ETY) Drives
SATA Non-Hot Plug 3.5" Entry (ETY) Drives
HP 160GB 3G SATA 7.2K NHP 3.5" ETY HDD
458947-B21
SATA Non-Hot Plug
SATA Non-Hot PlugSATA Non-Hot Plug
SATA Non-Hot Plug
HP 500GB 1.5G SATA 7.2K NHP 3.5" HDD, FIO
404469-B21
Storage Controllers
Storage ControllersStorage Controllers
Storage Controllers
NOTE:
NOTE:NOTE:
NOTE:
SAS Controller
ONLY required when Hot-
Plug CTO Chassis Model
is selected in Step 1.
HP SC44Ge Host Bus Adapter
NOTE:
NOTE:NOTE:
NOTE:
When using the SC44Ge with SATA Hard Drives, 1.5G SATA Hard Drives are
required. Transfer rate: 1.5 Gb/s SATA, 3 Gb/s SAS.
416096-B21
HP SC40Ge 4 Internal PCIe SAS RAID Half Height HBA, FIO
NOTE:
NOTE: NOTE:
NOTE:
Recommended HBA when purchasing Hot Plug CTO Chassis Model (P/N
445193-B21).
NOTE:
NOTE:NOTE:
NOTE:
When using the SC40Ge with SATA Hard Drives, 1.5G SATA Hard Drives are
required. Transfer rate 1.5 Gb/s SATA, 3 Gb/s SAS.
449363-B21
HP Smart Array E500/256MB Controller with Battery, FIO
NOTE:
NOTE:NOTE:
NOTE:
Customers can only order one Smart Array E500/256MB Controller and one
Battery-backed write cache upgrade (P/N 383280-B21) for the HP ProLiant DL160
G5 server based on battery space.
462105-B21
Battery-backed write cache upgrade
NOTE:
NOTE:NOTE:
NOTE:
When installing a battery-backed write cache module, the HP Smart Array
E500 must be installed in the full-length PCI slot. This 256MB Battery-backed write
cache upgrade for RAID 5 support.
383280-B21
HP Smart Array E200/128 BBWC Controller
411508-B21
HP HBA SAS-SATA 4x1LN Cable Kit
452130-B21
NOTE:
NOTE:NOTE:
NOTE:
This option is required for any internal port HBA or controller that has a
standard 4 port SAS/SATA connector.
QuickSpecs
HP ProLiant DL160 Generation 5 (G5)
HP ProLiant DL160 Generation 5 (G5)HP ProLiant DL160 Generation 5 (G5)
HP ProLiant DL160 Generation 5 (G5)
Configuration Information - Factory Integrated Models
DA - 12902 North America — Version 25 — September 17, 2009
Page 17

Other manuals for HP PROLIANT DL160 G5

Related product manuals