NOS installation 56
Installation Setting
Review the installation settings once again, then click Next to continue.
User Authentication Method
Select the authentication method appropriate for your environment, then click Next to continue.
Add a New Local User
Follow the prompt to add a new local user account, then click Next to continue.
Release Note
Review the release notes, then click Next to continue.
Hardware Configuration
Review the default hardware settings and modify them as necessary, then click Next to continue.
Installation Completed
Click Finish to reboot the system and proceed to the login window.
Installing Sun Solaris 10
Perform the procedures in this section to install Sun Solaris 10 to your server.
Pre-installation instructions
1. Complete the NOS pre-installation procedures.
2. Have the following installation requirements on hand:
○ HP DL160 G5p Server Support CD
○ Sun Solaris 10 Update 1 DVD
NOTE: You must first install a DVD-compatible optical media drive on your server before installing
Sun Solaris 10.
○ A Windows PC that has a:
− Floppy drive
− Optical media drive
− Browser that supports HTML
○ Two or more clients for testing purposes (optional)
Installation flow
1. Install Sun Solaris 10.
Refer to the next section for detailed instructions.
2. Install additional HP accessories.
The HP DL160 G5p Server Support CD includes the drivers for accessories compatible to your
server.
Refer to the product manual enclosed with the accessory for the detailed installation procedure
and/or to the attached readme.txt file associated with the driver. The readme.txt file can be
found on the appropriate driver diskette.
To Next Page
Loading...
