Removal and replacement procedures 56
Figure 33 Installing the backplane
3. Install all cables including optical drive cables.
System board configuration
Processor
HP ProLiant DL160 G5p Server supports dual and quad core processors. If a single CPU is installed,
then use socket 0.When two processors are used, the server supports boot functions through the
processor installed in processor socket 0.However, if processor 0 fails, the system can’t boot up, and
if processor 1 fails, the system will automatically boots from processor 0 and provides a processor
failure message.
The processor socket supports 2P Intel Harpertown series processor
CAUTION: It is recommended to use processors of same speeds or cache sizes to prevent possible
server malfunction.
To Next Page
Loading...
