Removal and replacement procedures 65
PCI riser card expansion slot
The PCI Express riser card attached to the PCI cage converts the functionality of the system board
expansion slot to the slot positioned at a 90° angle from the system board.
Figure 46 PCIe riser card slots location
• Single-Slot PCIe Riser card (x16 link with x16 slot)
Figure 47 PCIe riser card connector location
• Single-Slot PCIe Riser card (x16 link with x16 slot)
PCI cage
To remove the PCI cage:
NOTE: Disconnect all cables connecting an existing expansion board to the system board.
1. Loosen the two captive screws that secure the PCI cage to the chassis.
2. Lift the PCI cage away from the chassis.
To Next Page
Loading...
