Removal and replacement procedures 90
Figure 83 BBWC Location
To remove the BBWC assembly:
1. Push the tab that secures the BBWC assembly to the system board tray.
2. Slide the BBWC assembly, and then lift it out of the system board assembly.
Figure 84 Removing the BBWC Assembly
To reinstall the BBWC:
1. Push the tab that secures the BBWC assembly to the system board tray.
2. Align the locking tabs on the BBWC assembly to their holes on the tray. Press the BBWC
assembly into the tray, and then push it along the direction of the arrow to lock the locking tabs.
To Next Page
Loading...
