Hardware options installation 75
o
Expansion board installation into slot 2
o Expansion board installation into slot 3
9. Connect all necessary internal cabling to the expansion board. For more information on these cabling
requirements, see the documentation that ships with the option.
10. Install the PCI riser cage (on page 23).
IMPORTANT: The server does not power up if the PCI riser cage is not seated properly.
11. Install the access panel (on page 21).
12. Install the server into the rack ("Installing the server into the rack" on page 29).
13. Power up the server (on page 17).
Front USB 3.0 option
The front USB 3.0 option can only be installed in the eight-bay configuration.
For more information about product features, specifications, options, configurations, and compatibility, see
the product QuickSpecs on the HP website (http://www.hp.com/go/qs).
To Next Page
Loading...
