Removal and replacement procedures 58
To remove the processor:
1. Unlock the load lever and lift it up.
2. Open the retention plate.
3. Squeeze the push fingers of the processor installation tool.
4. Hold the processor with the installation tool.
Figure 36
Picking up the Processor from the Socket with the Installation Tool
5. Remove the processor with the installation tool.
Figure 37
Removing the Processor
NOTE: If the processor installation tool is not included, grasp the processor by its edges and lift it
out of the socket.
CAUTION: The pins of the socket are very fragile. Do not bend or damage them.
CAUTION: Place the processor on a static-dissipating work surface or in an anti-static bag.
To Next Page
Loading...
