Removal and replacement procedures 104
3. Align the dedicated management port to the plastic standoff, and insert the dedicated
management port into the dedicated management port connector.
4. Tighten the screw clockwise to secure the dedicated management port to the system board.
Figure 80 Reinstalling the Dedicated management port
TPM Module (Optional)
The server can support a TPM module. The TPM module is optional for the shipment.
The following figure shows the TPM module location.
Figure 81 TPM module Location
To remove the Dedicated management port:
1. Remove the security rivet from the system board
To Next Page
Loading...
