HP ProLiant DL180 G6 - Page 69

Removal and replacement procedures 69
Figure 30 Backplane Connectors / 25 2.5” HDD Model (solder side)
Item
Description
1 Power connector 1
2 Power connector 2
3 SAS/SATA expander chip with heat sink covered
4 CPLD PROG connector
5 I
2
C connector
6 Mini SAS connector 1
7 Mini SAS connector 2
WARNING: Ensure that the system is powered off and all power sources have been disconnected
from the server. Voltages are present at various locations within the server whenever an AC power
source is connected. This voltage is present even when the main power switch is in the off position.