Removal and replacement procedures 89
To install the PCIe riser card:
1. Align the three riser card locking-tab holes to the corresponding standoffs on the PCI cage, and
then push the card rightwards.
2. Tighten the screw that secures the riser card to the PCI cage.
Figure 55
Installing the Three PCIe x8 Riser Card
Figure 56 Installing the Two PCIe x8 Riser Card
1. Align the four riser card locking-tab holes to the corresponding screw standoffs on the PCI cage.
2. Tighten the screws that secure the riser card to the PCI cage.
To Next Page
Loading...
