Removing the server from the rackRemoving the server from the rack
PrerequisitesPrerequisites
Before you perform this procedure, review the:
Rack warnings and cautions
Server warnings and cautions
A fully populated chassis is heavy. Hewlett Packard Enterprise recommends removing the external chassis components before
removing the chassis from the rack.
ProcedureProcedure
1. If installed, remove the front bezel .
2. Power down the server.
3. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
4. Disconnect all peripheral cables from the server.
5. Extend the server from the rack .
6. Remove the server from the rack.
7. Place the server on a sturdy, level surface.
To Next Page
Loading...
