HP ProLiant DL345 Gen10 Plus - Releasing the Full-Length Expansion Board Retainer

Releasing the full-length expansion board retainerReleasing the full-length expansion board retainer
ProcedureProcedure
1. Power down the server.
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Do one of the following:
Extend the server from the rack .
Remove the server from the rack .
4. Remove the access panel.
5. Release the full-length expansion board retainer.
To replace the component, reverse the removal procedure.
Releasing the full-length expansion board retainer 71