HP ProLiant DL360 - Page 70

Diagnostics and Troubleshooting
Compaq ProLiant DL360 Server Maintenance and Service Guide 4-7
COMPAQ CONFIDENTIAL Codename: MIcroMachines Part Number: 169616-006 Last Saved On: 12/21/01 9:05 AM
Running the Utilities from Diskette
• Run the utilities from their individual diskettes. If you have a utility diskette newer than
the version on the SmartStart and Support Software CD, use that diskette.
• Create a diskette version of the utility from the SmartStart and Support Software CD.
To create diskette versions of the utilities from the CD:
1. Start the Compaq SmartStart and Support Software CD.
2. From the Compaq System Utilities screen, click Create Support Software Disks, then
Next.
3. Select the diskette you would like to create from the list, then follow the instructions on
the screen.
Running the Utilities from the Compaq SmartStart and Support Software CD
IMPORTANT: Only the System Configuration Utility and the Array Configuration Utility and the Array
Diagnostic Utility can be executed from the Compaq SmartStart and Support Software CD. All other
utilities must be executed from the Compaq system partition or from the diskette.
To run these utilities directly from the Compaq SmartStart and Support Software CD:
1. Start the Compaq SmartStart and Support Software CD.
2. From the Compaq System Utilities screen, select the utility you wish to run, then click
Next. To:
— Execute the System Configuration Utility, click Run System Configuration
Utility
— Execute the Array Configuration Utility, click Run Array Configuration Utility
— Execute the Array Diagnostic Utility, click Run Array Diagnostic Utility