HP ProLiant DL380 G3 - Page 33

Part Number 194989-001
Spare Kit 199382-B21
Operational Input Voltage Range (V
rms)
90 to 264
Frequency Range (Nominal) (Hz) 47 to 63 (50/60)
Nominal Input Voltage (Vrms) 100 115 208 220 230 240
Max Rated Output Wattage Rating 400 400 400 400 400 400
Nominal Input Current (A rms) 5.8 5.0 2.7 2.5 2.4 2.3
Max Rated Input Wattage Rating (Watts) 571 563 548 541 541 541
Max. Rated VA (Volt-Amp) 583 575 559 552 552 552
Efficiency (%) 70 71 73 74 74 74
Power Factor 0.98 0.98 0.98 0.98 0.98 0.98
Leakage Current (mA) 0.31 0.36 0.65 0.69 0.72 0.75
Maximum Inrush Current (A peak) 50 50 50 50 50 50
Maximum Inrush Current duration 20 20 20 20 20 20
System Specifications
ProLiant DL380 Generation 3 Fully Configured
Up to 2 Processors, 6 Memory Slots, 6 Hard Drives, 3 PCI Slots, and 2 Hot Plug Power Supplies
Nominal Input Voltage (Vrms) 100 115 208 220 230 240
Fully Loaded System Input Wattage (W) 431 411 406 400 395 390
Fully Loaded System Input Current (A
rms)
4.3 3.6 2.0 1.9 1.8 1.7
Fully Loaded System Thermal (BTU- Hr) 1421 1401 1383 1365 1347 1330
Fully Loaded System VA (Volt-Amp) 425 419 414 408 403 398
System Leakage with all power
supplies loaded (mA)
0.63 0.72 1.30 1.38 1.44 1.50
System Inrush Current with all power
supplies loaded (A)
100 100 100 100 100 100
Power cord requirements Nema 5-15P to IEC320-C13 Option no./Spare no.: See Chart below
IEC320-C13 to IEC320-C14 Option no./Spare no.:
142259-001/142258-B21
NOTES :
* To review typical system power ratings use the Active Answers Power Calculator which is available via the online tool located at URL:
http://h30099.www3.hp.com/configurator/powercalcs.asp .
To drill down to calculators:
- Click on: "ProLiant Servers"
- Click on the Server of interest. Example: DL380 G3
- Click on: "Power Calculator" link. (You may need to scroll down to see it.)
QuickSpecs
HP ProLiant DL380 Generation 3 (G3)
Power Specifications
DA - 11473 Worldwide — Version 45 — December 13, 2004 Page 33