Removal and replacement procedures 42
4.
Remove the PCI riser cage ("PCI riser cage" on page 40).
5. Remove the air baffle ("Air baffle" on page 41).
6. Disconnect the Systems Insight Display cable.
7. Remove the Systems Insight Display.
To replace the component, reverse the removal procedure.
Front left bezel
To remove the component:
1. Power down the server (on page 24).
2. Extend or remove the server from the rack ("Remove the server from the rack" on page 25, "Extend the
server from the rack" on page 25).
3. Remove the access panel ("Access panel" on page 29).
4. Remove the PCI riser cage ("PCI riser cage" on page 40).
5. Remove the air baffle ("Air baffle" on page 41).
6. Extend or remove the Systems Insight Display ("Systems Insight Display" on page 41).
To Next Page
Loading...
