Removal and replacement procedures 44
Fan cage
To remove the component:
1. Power down the server (on page 24).
2. Extend or remove the server from the rack ("Remove the server from the rack" on page 25, "Extend the
server from the rack" on page 25).
3. Remove the access panel ("Access panel" on page 29).
4. Remove the PCI riser cage ("PCI riser cage" on page 40).
5. Remove the air baffle ("Air baffle" on page 41).
6. Remove the fan blanks.
7. Remove the fans ("Hot-plug fan" on page 35).
8. Remove the fan cage.
To Next Page
Loading...
