Removal and Replacement Procedures 33
6. Remove the expansion board.
To replace the component, reverse the removal procedure.
Expansion Slot Cover (Slots 2 and 3)
To remove the component:
1. Extend or remove the server from the rack ("Extending the Server from the
Rack" on page 16
, "Removing the Server from the Rack" on page 18).
2. Remove the access panel ("Removing the Access Panel" on page 19
).
HP CONFIDENTIAL
File Name: 291916-6.doc Last Saved On: 2/5/04 2:26 PM
To Next Page
Loading...
