Removal and Replacement Procedures 35
To replace the component, reverse the removal procedure.
Front Bezel
To remove the component:
1. Power down the server.
2. Extend or remove the server from the rack ("Extending the Server from the
Rack" on page 16
, "Removing the Server from the Rack" on page 18).
3. Remove the six screws and detach the front bezel.
To replace the component, reverse the removal procedure.
CD-ROM Drive
To remove the component:
1. Power down the server.
IMPORTANT: The ejector button is recessed to prevent accidental
ejection; it may be helpful to use a pen or similar shaped object to
access the button.
HP CONFIDENTIAL
File Name: 291916-6.doc Last Saved On: 2/5/04 2:26 PM
To Next Page
Loading...
