3.
Remove the access panel ("Access panel" on page 32).
4. Remove the PCI riser cage ("PCI riser cage" on page 36).
("Air baffle" on page 42). 5. Remove the air baffle
6. Remove the battery.
attery replacement or proper disposal, contact an authorized reseller or an
authorized service provider.
Systems Insight Display
ge 36).
).
6. Disconnect the Systems Insight Display cable.
To replace the component, reverse the removal procedure.
For more information about b
To remove the component:
1. Power down the server (on page 26).
2. Extend the server from the rack (on page 25).
3. Remove the access panel ("Access panel" on page 32).
4. Remove the PCI riser cage ("PCI riser cage" on pa
5. Remove the air baffle ("Air baffle" on page 42
Removal and replacement procedures 52
To Next Page
Loading...
