Troubleshooting 149
Processor Reduced Power Mode Enabled in RBSU
Description: Processors clocked down
Action: If you select the reduced power mode in RBSU, the processor are
displayed as their reduced speed during POST. This message indicates that the
RBSU reduced power mode has been enabled and also indicates the maximum
speed for the installed processors.
Processor Not Started (Processor Stalled)
Description: If processor fails to launch or fails after being launched but before
completing its initialization, the processor is not started and this message is
displayed. This is likely a defective processor.
Processor Not Started (Stepping Does Not Match)
Description: If a processor has a stepping different than the bootstrap processor,
the processor is not started, and this message is displayed.
Processor Not Started (Unsupported Processor Stepping)
Description: If a processor has an unsupported stepping, it is not started, and this
message is displayed.
Processor Not Supported (Unsupported Core Speed)
Description: If a processor has a core speed that is incompatible with the other
installed processors, the processor is not started, and this message is displayed.
There must be a first DIMM in pair if second DIMM in pair is populated. Second
DIMM in pair ignored.
Description: The first DIMM socket in the pair is not populated. The second
DIMM in the pair is not recognized or used.
Action: Populate the DIMM socket.
To Next Page
Loading...
