54 HP ProLiant DL385 Server User Guide
Item Description Connector
Color
11 USB connectors (2) Black
12 Video connector Blue
4. Connect the power cord to the back of the server.
5. If you chose not to install the cable management arm, install the power cord
anchor to the server.
NOTE: Peripheral device cables are removed for clarity.
NOTE: If using the power cord anchor, be sure to leave enough slack
in the power cord so that the redundant power supply can be removed
without disconnecting the power cord from the primary power supply.
6. Secure cables to the cable management arm.
To Next Page
Loading...
