Removal and replacement procedures 28
Remove the server from the rack
To remove the server from an HP, Compaq branded, telco, or third-party rack:
1. Power down the server (on page 26).
2. Extend the server from the rack (on page 27).
3. Disconnect the cabling and remove the server from the rack. For more information, refer to the
documentation that ships with the rack mounting option.
4. Place the server on a sturdy, level surface.
Access the Systems Insight Display
To access the HP Systems Insight Display in a server with an 8-drive LFF configuration:
1. Press and release the panel.
To Next Page
Loading...
