HP ProLiant DL388 - Msg_Cpu_Rr_9; Msg_Cpu_Rr_10; Msg_Cpu_Rr_11; Msg_Cpu_Rr_12

Error messages 174
Action: Replace the board that CMOS is on.
MSG_CPU_RR_9
Event type: MMX hardware is not present.
Action:
CAUTION: Before removing or replacing any processors, be sure to follow the guidelines
provided in "Performing processor procedures in the troubleshooting process (on page 17)."
Failure to follow the recommended guidelines can cause damage to the system board, requiring
replacement of the system board.
Replace the processor.
MSG_CPU_RR_10
Event type: MMX add instruction has failed.
Action:
CAUTION: Before removing or replacing any processors, be sure to follow the guidelines
provided in "Performing processor procedures in the troubleshooting process (on page 17)."
Failure to follow the recommended guidelines can cause damage to the system board, requiring
replacement of the system board.
Replace the processor.
MSG_CPU_RR_11
Event type: MMX subtraction instruction has failed.
Action:
CAUTION: Before removing or replacing any processors, be sure to follow the guidelines
provided in "Performing processor procedures in the troubleshooting process (on page 17)."
Failure to follow the recommended guidelines can cause damage to the system board, requiring
replacement of the system board.
Replace the processor.
MSG_CPU_RR_12
Event type: MMX multiply instruction has failed.
Action:
CAUTION: Before removing or replacing any processors, be sure to follow the guidelines
provided in "Performing processor procedures in the troubleshooting process (on page 17)."
Failure to follow the recommended guidelines can cause damage to the system board, requiring
replacement of the system board.
Replace the processor.