HP ProLiant DL560 - Page 28

HP InfiniBand HP InfiniBand 4X QDR ConnectX-2 PCIe G2 Dual Port HCA 592520-B21
HP Infiniband FDR/Ethernet 10Gb/40Gb 2-port 544QSFP Adapter 649281-B21
NOTE: For the following two InfiniBand Adapters, only 1 FlexibleLOM can be added to
the server, which is selected in Step 2 for the "Configuration Information - Factory
Integrated Models" section. These two options are for upgrade or change from original
configuration.
NOTE: FLR Indicates HP FlexibleLOM Adapter series.
HP Infiniband FDR/Ethernet 10Gb/40Gb 2-port 544FLR-QSFP Adapter 649282-B21
HP Infiniband QDR/Ethernet 10Gb 2-port 544FLR-QSFP Adapter 649283-B21
NOTE: Please see the QuickSpecs for additional information:
http://h18000.www1.hp.com/products/quickspecs/13078_div/13078_div.html
HP I/O Expansion Options HP DL380p/560 Gen8 3 Slot PCI-E Riser Kit 653206-B21
HP DL380p/560 Gen8 2 Slot 2x16 PCI-E Riser Kit 653208-B21
HP Power Supplies NOTE: Prior to making a power supply selection it is highly recommended that the HP
Power Advisor is run to determine the right size power supply for your server
configuration. The HP Power Advisor is located at: www.hp.com/go/hppoweradvisor .
HP Common Slot Platinum Plus Power Supply Kits
NOTE: The following Power Supplies offer 94% efficiency with support for Intelligent
Power Discovery
HP 1200W Common Slot Platinum Plus Hot Plug Power Supply Kit
NOTE: Option Kits contain optional power supply, an IEC power cable and PDU IEC
cables.
NOTE: HP ProLiant servers ship with an IEC-IEC power cord used for rack mounting with
Power Distribution Units (PDUs). For a full list of optional HP power cords please go to
www.hp.com/products/powercords
656364-B21
NOTE: Power Specification and Technical Content for supported power supplies can be
found at:
http://h18000.www1.hp.com/products/quickspecs/14209_div/14209_div.html
HP Graphic Options HP 150W PCI-E Power Cable Kit 669777-B21
QuickSpecs
HP ProLiant DL560 Generation8 (Gen8)
Core Options
DA - 14395 Worldwide — Version 17 — December 13, 2013 Page 28