Removal and replacement procedures 30
5.
If any full-length expansion boards are installed, do one of the following:
o Remove the primary PCIe riser cage ("PCIe riser cage (primary)" on page 31)
o Remove the secondary PCIe riser cage ("PCIe riser cage (secondary)" on page 32)
6. Remove the air baffle.
To replace the component, reverse the removal procedure.
2U rack bezel
To remove the component:
Unlock the 2U rack bezel, press the latch on the 2U rack bezel, and then remove the 2U rack bezel.
To replace the component, reverse the removal procedure.
To Next Page
Loading...
