Removal and replacement procedures 58
5.
Remove the access panel ("Access panel" on page 29).
6. Remove the air baffle ("Air baffle" on page 29).
7. Remove the PCIe riser cage ("PCIe riser cage (primary)" on page 31).
8. If installed, remove the secondary PCIe riser cage ("PCIe riser cage (secondary)" on page 32).
9. If installed, remove the FBWC capacitor pack ("Flash-backed write cache capacitor pack" on page
43).
10. If installed, remove the cache module ("Flash-backed write cache module" on page 41).
11. Remove the FlexibleLOM ("FlexibleLOM" on page 38).
12. Remove all DIMMs ("DIMMs" on page 55).
13. Remove the power supply backplane ("Power supply backplane" on page 36).
14. Disconnect all cables connected to the system board.
15. Remove the heatsink ("Heatsink" on page 48).
16. Remove the processor ("Processor" on page 51).
17. Loosen the system board thumbscrews.
18. Remove the system board, using the handle to lift it out of the chassis.
To Next Page
Loading...
