HP Proliant DL580 - Removing a Drive from Bay 1

Installing Hardware Options
Table 5-6: Slimline Drive Bays
Item Description Item Description
1
Eject button for slimline
drive bay 1
3
Slimline drive bay 2
2
Slimline drive bay 1
4
Eject button for slimline
drive bay 2
Removing a Media Drive
To remove a media drive:
1. Power down the server. Refer to “Powering Down the Server” in this chapter.
2. Use the Torx T-15 tool to press the appropriate ejection button (1), and pull the
drive out of the bay (2).
Figure 5-31: Removing a drive from bay 1
5-38 HP ProLiant DL580 Generation 2 Server Setup and Installation Guide
HP CONFIDENTIAL
Writer: Karen Hale File Name: f-ch5 Installing Hardware Options.doc
Codename: Dwarf Part Number: 230835-003 Last Saved On: 6/26/03 9:31 AM