HP Onboard Administrator errors 207
Event Cause
more current than they are able.
Restart Event
The Onboard Administrator is about to start.
Rack Name Change
The rack name stored on the enclosure was
changed.
Rack Topology
Enclosures were connected or disconnected
from the enclosure link.
Thermal Status Change
A thermal sensor has changed state.
User Removed
A user was removed from the Onboard
Administrator. If you are logged in as this user,
you are disconnected from the Onboard
Administrator.
User Disabled
A user was disabled. If you are logged in as this
user, you are disconnected from the Onboard
Administrator.
User Rights
The privilege level of a user on the Onboard
Administrator was changed. If you are logged
in as this user, you are disconnected from the
Onboard Administrator. You can log in again
with your new privilege level.
To Next Page
Loading...
