HP ProLiant Gen9 - Page 324

Microsoft Windows Event ID and SNMP traps 324
Log Message: The cleaning tape in the tape drive in %4, SCSI bus %5, SCSI target %6 needs to be replaced.
SNMP Trap: cpqDa6TapeDriveCleanTapeReplace - 3045 in CPQIDA.MIB
Symptom: Tape Drive Cleaning Tape Needs Replacing. The agent has detected that an autoloader tape unit
has a cleaning tape that has been fully used and therefore needs to be replaced with a new cleaning tape.
Supporting SNMP Trap Data:
• sysName
• cpqHoTrapFlags
• cpqDaCntlrHwLocation
• cpqDaTapeDrvCntlrIndex
• cpqDaTapeDrvBusIndex
• cpqDaTapeDrvScsiIdIndex
• cpqDaTapeDrvLunIndex
• cpqDaTapeDrvName
• cpqDaTapeDrvFwRev
• cpqDaTapeDrvSerialNumber
Supporting SNMP Trap Description: “Cleaning tape needs replacing.”
NT Event ID: 1212 (Hex)0x843504bc (cpqstmsg.dll)
Log Severity: Warning (2)
Event Title: Storage System Fan Status Change.
Log Message: The %6 %7 storage system connected to SCSI bus %5 of the controller in %4 has a new status
of %2.
SNMP Trap: cpqSs5FanStatusChange - 8026 in CPQSTSYS.MIB
Symptom: Storage System fan status change. The agent has detected a change in the Fan Status of a storage
system. The variable cpqSsBoxFanStatus indicates the current fan status.
User Action: If the fan status is degraded or failed, replace any failed fans.
Supporting SNMP Trap Data:
• sysName
• cpqHoTrapFlags
• cpqSsBoxCntlrHwLocation
• cpqSsBoxCntlrIndex
• cpqSsBoxBusIndex
• cpqSsBoxVendor
• cpqSsBoxModel
• cpqSsBoxSerialNumber
• cpqSsBoxFanStatus
Supporting SNMP Trap Description: “Storage System fan status changed to [cpqSsBoxFanStatus].”