Microsoft Windows Event ID and SNMP traps 329
• cpqSsBoxLocationString
Supporting SNMP Trap Description: “Storage System temperature status changed to
[cpqSsBoxTempStatus].”
NT Event ID: 1220 (Hex)0x843504c4 (cpqstmsg.dll)
Log Severity: Warning (2)
Event Title: Storage System Fault Tolerant Power Supply Status Change.
Log Message: The fault tolerant power supply in the %6 %7 storage system connected to %5 of the controller
in%4 has a new status of %2.
SNMP Trap: cpqSs6PwrSupplyStatusChange - 8031 in CPQSTSYS.MIB
Symptom: Storage System Fault Tolerant Power Supply Status Change. The agent has detected a change in
the power supply status of a storage system. The variable cpqSsBoxFltTolPwrSupplyStatus indicates the
current power supply status.
User Action: If the power supply status is degraded, restore power or replace the failed power supply.
Supporting SNMP Trap Data:
• sysName
• cpqHoTrapFlags
• cpqSsBoxCntlrHwLocation
• cpqSsBoxCntlrIndex
• cpqSsBoxBusIndex
• cpqSsBoxVendor
• cpqSsBoxModel
• cpqSsBoxSerialNumber
• cpqSsBoxFltTolPwrSupplyStatus
• cpqSsBoxLocationString
Supporting SNMP Trap Description: “Storage System power supply status changed to
[cpqSsBoxFltTolPwrSupplyStatus].”
NT Event ID: 1221 (Hex)0x843504c5 (cpqstmsg.dll)
Log Severity: Warning (2)
Event Title: SAS/SATA Physical Drive Status Change.
Log Message: The physical drive in %4, %5 with serial number “%6”, has a new status of %7.
SNMP Trap: cpqSasPhyDrvStatusChange - 5022 in CPQSCSI.MIB
Symptom: Physical Drive Status Change. The Storage Agent has detected a change in the status of a SAS or
SATA physical drive. The current physical drive status is indicated in the cpqSasPhyDrvStatus variable.
User Action: If the physical drive status is predictiveFailure(3), failed(5), ssdWearOut(10) or
notAuthenticated(12) replace the drive.
Supporting SNMP Trap Data:
• sysName
To Next Page
Loading...
