HP ProLiant Gen9 - Page 378

Microsoft Windows Event ID and SNMP traps 378
• cpqRackUid
• cpqRackServerBladeEnclosureName
• cpqRackServerBladePosition
• cpqRackServerBladeSparePartNumber
• cpqRackCommonEnclosureSerialNum
• cpqRackCommonEnclosureTrapSequenceNum
Supporting SNMP Trap Description: “Server power on via manual override on blade
[cpqRackServerBladePosition], in enclosure [cpqRackServerBladeEnclosureName], in rack
[cpqRackName].”
NT Event ID: 1169 (Hex)0x84350491 (cpqsvmsg.dll)
Log Severity: Warning (2)
Event Title: Fuse or Breaker Tripped
Log Message: The fuse has been tripped.
SNMP Trap: cpqRackFuseOpen - 22027 in CPQRACK.MIB
Symptom: Fuse open. The fuse has been tripped.
User Action: Check enclosure and blade power connections and reset the fuse.
Supporting SNMP Trap Data:
• sysName
• cpqHoTrapFlags
• cpqRackName
• cpqRackUid
• cpqRackCommonEnclosureName
• cpqRackCommonEnclosureFuseLocation
• cpqRackCommonEnclosureSparePartNumber
• cpqRackCommonEnclosureSerialNum
• cpqRackCommonEnclosureTrapSequenceNum
Supporting SNMP Trap Description: “Fuse open fuse [cpqRackCommonEnclosureFuseLocation], in enclosure
[cpqRackCommonEnclosureName], in rack [cpqRackName].”
NT Event ID: 1170 (Hex)0x84350492 (cpqsvmsg.dll)
Log Severity: Warning (2)
Event Title: Server Blade Removed
Log Message: The server blade has been removed from the enclosure.
SNMP Trap: cpqRackServerBladeRemoved - 22028 in CPQRACK.MIB
Symptom: Server blade removed. The server blade has been removed from the enclosure.
User Action: None.
Supporting SNMP Trap Data: