Hardware Options Installation 71
Tower-to-Rack Conversion Option
Converting a Tower Server to a Rack Server (on page 71)
Installing the Rack Server (on page 74
)
Accessing the Server in the Rack (on page 74
)
Converting a Tower Server to a Rack Server
The tower-to-rack conversion kit includes all equipment required to convert the
tower model server into a rack model server, and to install the server into most
square- or round-hole racks.
The tower-to-rack conversion kit includes:
•
•
•
•
•
•
•
•
•
Rack rails
Cable management arm
Server rails
Cage nuts
Rack template
Server bezel for rack environment
In addition to the supplied items, you may need:
T-10 Torx screwdriver
T-15 Torx screwdriver
Pencil
To convert a tower server to a rack server:
1. Power down the server ("Powering Down the Server" on page 21
).
2. Remove the front bezel door, if necessary ("Removing Front Tower Bezel"
on page 23
).
3. Remove the feet.
To Next Page
Loading...
