HP ProLiant ML350e Gen8 v2 Server - Remove the PCI Air Baffle

Operations 27
b.
Tighten the thumbscrews.
2. Return the server to an upright position.
3. Lock the front bezel (on page 24).
4. Power up the server (on page 23).
Remove the PCI air baffle
1. Power down the server (on page 23).
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Unlock the front bezel (on page 24).
4. Place the server on its side.
5. Remove the access panel (on page 25).
6. Remove the PCI air baffle.