install the scanner
3
3 Connect the power cable between the scanner and a surge protector or a
grounded wall outlet that is easy to reach. This turns on the scanner.
4 Follow the prompts in the New Hardware Found wizard.
5 Insert the HP Photo & Imaging software CD-ROM and click Next. If the
wizard prompts you for a drive letter, select your CD-ROM drive.
6 In the HP Scanjet installation program, follow the instructions.
7 After installation is complete, another HP installation program starts. You
can install additional software, register your scanner, and find additional
help. To see if your scanner came with additional software, click Install
software and follow the prompts.
connect the optional TMA (hp scanjet 3500c series only)
Your scanner might have a transparent materials adapter (TMA) to scan 35 mm
slides or negatives.
• If your scanner has a TMA, connect the TMA cable to its port on the
scanner.
usermanual.book Page 3 Tuesday, February 12, 2002 9:27 AM
To Next Page
Loading...
Need help?
General
