108 Troubleshooting and maintaining Back to TOC
Clearing jams from the ADF 
Pages can jam at the beginning or the end of a page. Use the 
appropriate procedure below to clear the jam and continue.
To clear jams at the start of a page
1 Raise the hatch.
2 Lift the large green tab (located to the left of the roller) and gently 
remove the jammed page.
3 If the item cannot be easily removed, lift the two green tabs located 
behind the rollers and gently remove the green paper lead as 
shown. 
Note: Using force to remove the page might cause damage to 
your originals. If the majority of the paper is already 
through the main roller, use the procedure to clear jams 
at the end of a page.